文轩热能_水冷板散热器热设计热管理系统_铝型材铲齿摩擦焊热管_散热片散热板生产加工厂家

Chinese

Advisory hotline: 4008-557-528

hot key words: Dongguan skived fin heat sink vendor Shenzhen skived fin heat sink vendor Dongguan PV inverter heat sink PV inverter heat sink vendor Jiangsu skived fin heat sink vendor Custom SVG heat pipe thermal module

3C products are also called information home appliances, which typically mean computers, telecommunications, and consumer electronics. There are a wide variety of products with a huge demand. China has become the worldwide largest 3C consumption market for 3C products. With the enhancement of the financial condition and income of our citizens, there is a higher demand for the quality of electronic products. Companies launch products with better configuration, better performance, andbetter designs in order to satisfy consumers
There are a great number of factors which affect the quality of electronic products and cooling is a factor that could not be neglected. Especially after the development of the "Samsung battery-gate" event in 2016, electronics manufacturers pay more attention to the cooling performance and safety of their products. How to make sure the cooling of an electronic product meet the stringent design requirements? The best approach is to plan for thermal management at the beginning of the product design cycle so as to acquire the optimal cooling solution. Winshare Thermal is an outstanding cooling techniques supplier, who can provide the cooling solutions for IT telecommunication electronics products including mainboard cooling, CPU cooling, graphics card cooling, radio frequency module cooling,RU cooling, game console cooling,VR cooling, IPC cooling, server cooling, central variable frequency air conditioner cooling,TEC cooling, etc.
The target to be achieved by the simulation of the cooling solution:
PCB source temperature ≤100
CPU temperature ≤80℃
Schematic of simulation model and relevant parameters:
(1)

DCDC output

Thermal conductivity:10W/(m*K) Power:5W

CPU chipset

Thermal conductivity:10W/(m*k) Power:10W

PCB MST

Thermal conductivity:15W/(m*K) Power:5W

CPU PCB

Thermal conductivity:15W/(m*K) Power:4W

CPU heat sink

Dimensions: 125*95*6mm, base plate thickness:2mm, fin count: 10pcs, thickness: 0.6mm;Thermal conductivity: AL-extru. 180W/(m*K)

CU block

Dimensions:41*41*4.7, Thermal conductivity:385 W/(m*k)

Thermal grease

Thickness: 0.3mm,Thermal conductivity:3.5W/(m*K)

Soldering approach

Solder paste 4258,Thermal conductivity:48W/(m*k) 0.2mm

 
(2)

Front side of the grille

Dimensions:170*27mm; Open area ratio:0.5

Right side of the grille

Dimensions:35*30 mm; Open area ratio:0.6

Back side of the grille

Dimensions:30*30 mm; Open area ratio::0.7

fan

Dimensions:30*30*10 mm

 
(3)

Top side of mainboard

Dimensions:140*170mm; Thermal conductivity:10W/(m*k); Power:3W

Back side of heat source

0.8W/pcs

Front side of heat source

Left row:0.8W/pcs; right row: 1.2W/pcs;
The Row marked as "2":1.5W/pcs

Heat sink

Dimensions:140*170*4.5mm; Base plate thickness: 2mm; Fin height:2.5mm,
Fin count:10pcs; fin thickness:0.6mm; Thermal conductivity:180W/(m*K)

Thermal grease

Thickness: 0.3mm; Thermal conductivity:3.5W/(m*K)

 
(4)

ottom side of mainboard

Dimensions:140*170mm; Thermal conductivity:10W/(m*k); Power:3W。

Source of inverse

功率:1.5W/pcs

Heat sink

Dimensions:140*170*4.5mm; Base plate thickness: 2mm; Fin height:2.5mm,
Fin count:10pcs; Fin thickness:0.6mm; Thermal conductivity:180W/(m*K)

Thermal grease

Thickness: 0.3mm; Thermal conductivity:3.5W/(m*K)

 
Descriptions of the heat sink cooling solution:

(1) Add an30*10mm axial fan to increase the air flow through RX module;
(2) Modify the copper fins in front of the fan in order to increase system air flow.

Schematic of the simulation model of the overall cooling layout:
Parameters of the copper fins after the modification:

Copper fins

Dimensions:30*12*0.3mm; Inclination: 1.0; Quantity: 30pcs

Material:C1100; Thermal conductivity:385W/(m*K)。

Heat pipe

D6 heat pipe thickness: 3mm with the pressed-tube technique; Heat pipe type: Powder sintered;
Thermal conductivity:10000W/(m*k)

Add a 30*10mm axial fan; the open area ratio of the new fan inlet is 0.7.

Baffle

Dimensions:160*33*0.5mm; Material: SUS

 
CPU fan operating point: Volume flow rate:2.43ft^3/min Pressure:17.47Pa
Schematic of simulated CPU module temperature and air flow distribution:
 Ambient temperature: 40℃; Maximum temperature of the CPU chipset:64.43℃
Schematic of the simulated temperature distribution on the top side of the RX module:

NO.

Maximum temperature

NO.

Maximum temperature

NO.

Maximum temperature

Source 1

59.43

Source 1.7

59.73

Source 3.1

59.59

Source 1.1

59.54

Source 2

60.02

Source 3.2

59.7

Source 1.2

59.66

Source 2.1

60.19

Source 3.3

59.77

Source 1.3

59.73

Source 2.2

60.16

Source 3.4

59.8

Source 1.4

59.76

Source 2.3

59.96

Source 3.5

59.8

Source 1.5

59.77

Source 2.4

59.76

Source 3.6

59.78

Source 1.6

59.76

 Source 3

 59.48

Source 3.7

59.74

Schematic of the simulated temperature distribution on the bottom side of the RX module:
 

NO.

Maximum

NO.

Maximum

Source 4

60.83

Source 4.4

60.95

Source 4.1

60.53

Source 4.5

60.89

Source 4.2

60.92

Source 4.6

60.8

Source 4.3

60.96

Source 4.7

60.67

Fan operating point:
CPU fan: 2.43ft^3/min ,17.47Pa;
RX fan1: 2.23ft^3/min ,18.65Pa;
RX fan2: 2.5ft^3/min ,17.09Pa;
RX fan3:2.22ft^3/min,18.70Pa。
 
Air flow through fan grilles:
CPU grille:2.26ft^3/min;
RX grille1:1.95 ft^3/min;
RX grille2:2.23 ft^3/min;
RX grille3:1.962ft^3/min;
Total: 8.4ft^3/min。
 
Miniature of the overall air flow trajectory from the simulation results:
 
Summary of the simulation results for the cooling solution:

 

CPU maximum temperature
(℃)

Temperature range of the heat source
(℃)

System air flow
(ft^3/min)

Simulation results of the solution

64.43

60.92~59.43

8.4

The results meet the requirements of CPUtemperature less thanand heat source temperature less than 100℃ and the thermal design is complete.

 

The voice of Winshare Thermal: credit and word

Winshare Thermal Ltd. (hereinafter referred to as Winshare Thermal) was founded in 2009. We specialize in the research and development, production and technical services of high power cooling solutions. We are devoted to becoming the leader in the thermal... [See details]

Copyright: Dongguan Winshare Thermal Ltd.

主站蜘蛛池模板: 热门网页游戏平台_页游排行榜_新开网页游戏开服表_599游戏 | 旋转补偿器-专注套筒三维球形补偿器定制生产厂家-伸缩接头价格_巩义市新华丰管道设备有限公司 | 水处理设备厂家_纯净水设备_超纯水设备价格找西安瑞泉水处理 | 耐磨螺旋叶片_耐磨螺旋绞龙_KNM螺旋耐磨材料-北京耐默 | 济宁卡尔迪机械制造有限公司_铁路换枕机_升降驾驶室_挖机加高底盘_加长臂 | 小程序商城,_电商系统源码,直播商城定制开发电商系统源码,电商系统,java电商系统 | 苏子富春品牌馆 抚顺市富春农业科技开发有限公司 抚顺特色农产品 抚顺市特色馆 | 山东胜王水处理设备有限公司,反渗透设备,纯净水设备,污水处理设备,SWS系列全自动钠离子交换器,纯净水设备报价,活性碳过滤器,多介质过滤器 | 聚焦吉林-城市晚报官方网站| 西安宣传片拍摄,陕西艺景网络科技有限公司资料备份,西安影视公司,视频拍摄制作,抖音视频制作,纪录片拍摄西安短视频摄影团队,西安抖音视频拍摄 | 桶装水配送-瓶装水-净水器-厦门水之露商贸有限公司,电话:18205922444 | 天津印刷_天津印刷厂_天津印刷公司_天津包装盒厂家_天津包装盒印刷厂_七层共挤膜厂家_彩色印刷_画册印刷_礼品盒定做 _七层共挤膜_食品真空袋-欢迎访问嘉联包装官网! | 专注欧美工业控制自动化设备-MRO工业品采购服务-科电远扬 | 四字成语大全6000个,经典成语大全及解释,1000个50000个成语及解释 - 同鑫成语网 | 耐磨涂料_陶瓷涂料_高温涂料_高硬度耐磨涂料-北京耐默科技 | 心理咨询室设备_音乐放松椅_心理测评系统_情绪宣泄设备厂家 | 红都服装官网-北京红都西服-红都西服定制-北京红都集团 | 涡街流量计罗茨气体涡轮厂家_衡水多元仪表有限公司 | 声测管厂家_注浆管现货_桩基声测管_河北沧州新迈实业有限公司 | 真空清洗炉_真空煅烧炉_铸铝加热器-盐城市钰凯电器有限公司 | 重大事件回顾:三亚哪里可以打炮?2025年最全实战攻略带你玩转真枪射击 | 無谷轻食官网_沙拉轻食加盟_轻食加盟总部_轻食加盟费用 | 葡萄糖酸钠_食用葡萄糖_精萘-安徽鹏腾实业有限公司 | 潍坊网络推广,临沂360推广,东营360推广,枣庄360推广,潍坊网站建设,潍坊网络公司,潍坊360搜索,潍坊APP开发,潍坊360推广,潍坊360代理,潍坊点睛网络科技有限公司 | 江门市东信科技 - 江门小程序开发,江门网站制作,江门软件开发,江门app开发 | 磐石在线-磐石市综合信息门户网www.pszx.com - Powered by Discuz! | 清河县隆鑫密封件有限公司,汽车用密封条,配电箱柜、集装箱密封胶条,建筑门窗、家具用密封条,无毒环保医用密封条,船舶、农机用密封条,异型产品 | 卧螺离心机-固液分离机-台州春鼎机械制造有限公司 | 品牌T恤零售/批发厂商/供应商_男女式T恤生产/设计-圣达信T恤 | 买化工,找万创!泉州万创化工贸易有限公司 | 冷却特性测试仪_ 刀柄热胀仪_加油小车价格_皮带张力仪_上海川奇机电设备有限公司 | 济宁市泓世新型建材有限公司,山东ALC墙板,GRC轻质隔墙板,预制化粪池,复合墙板加工厂家 | 山东飞斯特汽车科技有限公司| 耐磨钢板_复合耐磨板_KN60耐磨钢板-北京耐默公司 | 舟舟宝贝少儿培训网-少儿艺术培训-少儿舞蹈培训-少儿英语培训 | 内蒙古碧云食品有限公司 | 展柜设计定制-品牌展柜订做-展柜制作厂家「广州嘉艺展柜」 | 精密机械加工_零件加工_机械零部件加工厂_高精密零件加工定制—深圳精密机械加工厂 | 山东国新起重机械有限公司,国新起重,起重设备,起重机械,山东起重机厂家,行车,龙门吊 | 深圳办公室装修_设计_实景_效果图_哪家好-公装装饰公司 | 太原铁艺围栏-山西泓宸辉铁艺工程有限公司 |